Deskripsi Produk
Bevel helical gearbox with Permanent magnet synchronous motor integrate variable frequency driver for conveyor
SNKG Series prorduct adopt harden teeth surface bevel gear and helical gear to drive, following the design principle of modularization , FEA analyse technology, unique low-noise gear tooth profile, with the characteristics of compact volume, high load performance and stable running, reliability and long service life.
Key Benefits
-Simple wiring, low cost
-Large amount of data, fast speed, 100m, data transmission is 500K
-All control units have the same condition, it means each node has the same rights to occupy the bus (send and receive)
-Communication rate meets control requirements, communication data amount supports required data reading.
-Electric eye and proximity switch sensor supply signal to the driver directly, it is convenient and reliable.
Tentang Kami
ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of CHINAMFG
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.
Packing
Delivery
/* 22 Januari 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Aplikasi: | Machinery, Agricultural Machinery |
|---|---|
| Fungsi: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Tata letak: | Helical Bevel |
| Kekerasan: | Permukaan Gigi yang Mengeras |
| Instalasi: | Torque Arm Type |
| Melangkah: | Single-Step |
| Contoh: |
US$ 569/Piece
1 Buah (Minimum Pemesanan) | |
|---|
| Kustomisasi: |
Tersedia
| Permintaan Khusus |
|---|
Keunggulan Gearbox Bevel dalam Skenario Tertentu
Gearbox bevel menawarkan keunggulan tersendiri dalam skenario tertentu, sehingga lebih disukai daripada jenis gearbox lainnya:
- Transmisi Sudut: Ketika gerakan rotasi perlu ditransmisikan antara poros yang berpotongan pada sudut yang berbeda, gearbox bevel unggul karena kemampuannya untuk mengubah arah.
- Ruang Kompak: Gearbox bevel sangat cocok untuk aplikasi dengan ruang terbatas, karena dapat dipasang dalam konfigurasi yang sempit tanpa mengorbankan kinerja.
- Torsi Tinggi pada Sudut 90 Derajat: Dalam situasi yang membutuhkan transmisi torsi tinggi pada sudut 90 derajat, gearbox bevel lebih efisien daripada jenis lainnya.
- Mekanisme Kemudi: Gearbox bevel umumnya digunakan dalam sistem kemudi kendaraan dan mesin, memberikan kontrol arah yang halus dan akurat.
- Persyaratan Gerakan yang Kompleks: Ketika mesin atau peralatan membutuhkan pola gerakan rumit yang melibatkan perubahan arah dan kecepatan, gearbox bevel menawarkan fleksibilitas yang diperlukan.
- Aplikasi Tugas Berat: Gearbox bevel unggul di lingkungan kerja berat di mana kekokohan, transmisi torsi, dan daya tahan sangat penting.
Desain dan kemampuan khusus dari gearbox bevel menjadikannya pilihan yang disukai dalam skenario ini, berkontribusi pada kinerja dan efisiensi optimal dalam berbagai aplikasi industri.
Maintenance Procedures to Extend the Lifespan of Bevel Gearboxes
Proper maintenance is essential for extending the lifespan of bevel gearboxes. Here are specific procedures to ensure their longevity:
- Regular Inspection: Conduct routine visual inspections to identify signs of wear, damage, or misalignment. Check for unusual noise, vibration, or leaks.
- Pelumasan: Follow the recommended lubrication schedule and guidelines for the specific gearbox. Ensure the correct type and quantity of lubricant are used.
- Cleanliness: Keep the gearbox and its surrounding area clean to prevent dirt, debris, and contaminants from entering and causing damage.
- Tightening and Fasteners: Periodically check and tighten fasteners, bolts, and mounting components. Loose fasteners can lead to misalignment and excessive wear.
- Penyelarasan: Ensure proper alignment of the gearbox with connected components. Misalignment can cause increased friction, heat, and wear.
- Temperature Monitoring: Monitor the operating temperature of the gearbox to identify any overheating issues. Excessive heat can degrade lubricant and components.
- Seals and Gaskets: Inspect and replace seals and gaskets as needed to prevent leaks and contamination.
- Gear Tooth Inspection: Periodically check gear teeth for signs of pitting, chipping, or wear. Address any issues promptly to prevent further damage.
- Vibration Analysis: Implement vibration analysis to detect irregularities in the gearbox’s operation. Unusual vibrations may indicate misalignment or other mechanical issues.
- Replace Worn Parts: Replace worn or damaged components, such as bearings, gears, and seals, with genuine parts from the manufacturer.
- Professional Maintenance: Engage qualified technicians for more in-depth inspections and maintenance tasks, especially for complex gearboxes.
- Operating Conditions: Operate the gearbox within its specified load, speed, and temperature limits to prevent excessive stress and wear.
- Training: Ensure personnel are trained to operate, maintain, and troubleshoot the gearbox properly.
- Record Keeping: Maintain detailed records of maintenance activities, inspections, and repairs for reference and future planning.
By following these maintenance procedures, bevel gearboxes can maintain optimal performance, minimize downtime, and have an extended operational lifespan.
Jenis-Jenis Gearbox Bevel dan Klasifikasinya
Gearbox roda gigi bevel hadir dalam berbagai jenis, masing-masing dirancang untuk aplikasi dan kebutuhan spesifik. Gearbox ini diklasifikasikan berdasarkan faktor-faktor seperti susunan roda gigi, orientasi poros, dan penggunaan. Beberapa jenis gearbox roda gigi bevel yang umum meliputi:
- Gearbox Bevel Lurus: Kotak roda gigi ini menggunakan roda gigi bevel lurus dan cocok untuk mentransmisikan gerakan antara poros yang berpotongan pada sudut 90 derajat.
- Kotak Gigi Bevel Spiral: Kotak roda gigi ini menggunakan roda gigi bevel spiral dan digunakan ketika poros yang berpotongan berada pada sudut selain 90 derajat. Kotak roda gigi ini menawarkan pengoperasian yang lebih halus dan kapasitas beban yang lebih tinggi.
- Gearbox Bevel Miring: Pada gearbox bevel miring, sumbu poros input dan output tidak sejajar atau berpotongan. Gearbox ini digunakan dalam aplikasi di mana poros yang tidak sejajar dan tidak berpotongan perlu dihubungkan.
- Gearbox Bevel Sudut: Kotak roda gigi bevel sudut dirancang untuk menghubungkan poros pada sudut tertentu, sering digunakan dalam aplikasi di mana sudut poros yang dibutuhkan berbeda dari konfigurasi roda gigi bevel standar.
Klasifikasi gearbox roda gigi bevel didasarkan pada susunan dan orientasi gigi dan porosnya. Produsen menawarkan berbagai desain untuk mengakomodasi berbagai kebutuhan industri dan memastikan transmisi gerakan yang efisien pada berbagai sudut.
editor by CX 2024-04-24
