Our standard 700 Series – the heart of Ever-Power acceleration reducer products – has been serving industry reliably for over 10 years. Its proven modular style has set the industry standard for functionality and is the most imitated product in today’s worm gear speed reducer marketplace. But why settle for a knock-off when you can have the initial – from Ever-Power.
विशेष विवरण
11 बुनियादी एकल कमी आकार
8 बुनियादी दोहरे रिडक्शन आकार
1/6 – 25 एचपी
5:1 – 100:1 अनुपात एकल कमी
100:1 – 3600:1 अनुपात में दुगुना कमी
नॉन-फ्लैंज्ड, NEMA C-फेस क्विल और कपल्ड इनपुट स्टाइल
प्रोजेक्टिंग और खोखले परिणाम शाफ्ट
1/2″ से 2-1/4″ व्यास तक के प्रक्षेपित व्यास
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
उत्पाद की विशेषताएँ
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility permits installation in practically any position.
क्षैतिज और ऊर्ध्वाधर आधारों के सटीक संरेखण के लिए, हाउसिंग को ऊपर और नीचे दोनों स्तरों पर स्ट्रैडल-मिल्ड किया जाता है।
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes have earned a reputation to be an industry benchmark worldwide. Our achievement came from our relentless drive for quality with state-of-the-artwork technology, all while offering worm gearboxes are affordable prices. High flexibility accorded through a wide choice of mounting choices, shaft configurations and motor interfaces, makes the Ever-Power worm gearbox the default choice for the sector. The helical-worm and the double-worm edition, with or without the torque limiter, soon add up to the advantage, creating a highly versatile drive system.
Ever-Power Worm gearboxes provide high torque with low swiftness gear ratio. Being simple and compact in design, these gears can perform higher gear ratio compared to the helical gears. These कृमि में कमी gears having screw type qualities are similar to helical gears, but its helix position is typically comparatively larger) and its own body is normally quite long in the axial direction. The gears in these gearboxes can be right or left-handed depending upon the purpose.
Mounting choice include universal housing, part flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (single or dual), with torque arm or torque limiter.
वर्म रिडक्शन गियर की विशेषताएं
सिद्धांत
A worm gear is a kind of interlocking gear composed of a worm shaft and worm wheel. The worm is definitely shaped such as a screw and the worm wheel is a kind of gear machined to have a tooth profile with the same configuration.
The operation of a worm gear is comparable with that of a bolt and nut. The principle is equivalent to a nut that is fixed so that it cannot rotate and therefore progresses in the axial direction when the bolt is certainly turned.
The design of a worm gear is thought of through the relationship between your rack and spur gear on the middle plane of the worm wheel.
विशेषताएँ
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. For this reason, in a 1 speed decrease gears, the wheel could be manufactured therefore that it’ll be rotated 1/60 (1/120 in particular applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This characteristic makes it possible to layout the turning transmission direction at a right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). You’ll be able to change the rotation path of the worm wheel by changing the screw path.
A multitude of shaft layouts The wide variety of shaft layouts is one of the features of interlocking gears.For example, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Body 2) and, if attachment orientations are included, you’ll be able to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is certainly characteristic because the contact is definitely linear and the relative slide is excellent. In comparison to rolling power transmission, noise and vibration are really low. For this reason, this technology is used to drive medical devices, elevators and escalators, etc.
वर्म रिडक्शन गियर की प्राथमिक विशिष्टताएँ
एमए सीरीज (लघु)
केंद्र दूरी (मिमी) 32,40
कमी अनुपात 10, 20, 30, 40, 50, 60
इनपुट क्षमता (किलोवाट) 0.1～1 (1800 आरपीएम के इनपुट पर)
आउटपुट टॉर्क (N・m) 20～66
इनपुट गति (rpm) 0～1800
एमए सीरीज (मध्यम)
केंद्र दूरी (मिमी) 50, 63, 80, 100, 125, 140, 160
कमी अनुपात 10,15,20,25,30,40,50,60
इनपुट क्षमता (किलोवाट) 0.4～30 (1800 आरपीएम के इनपुट पर)
आउटपुट टॉर्क (N・m) 900～3570
इनपुट गति (rpm) 0～1800
एस सीरीज
केंद्र दूरी (मिमी) 50, 60, 70, 80, 100, 120, 135, 155, 175, 200, 225, 250, 300, 350, 400, 450, 500
कमी अनुपात 10,15,20,25,30,40,50,60
इनपुट क्षमता (किलोवाट) 0.3～255 (1800 आरपीएम के इनपुट पर)
आउटपुट टॉर्क (N・m) 50～56600
इनपुट गति (rpm) 0～1800
वर्म रिडक्शन गियर चुनते समय मुख्य बिंदु
चयन
When selecting a worm reduction gears, the procedures for selecting the right gear are described in the manufacturer catalogs and the series and models ought to be selected according to those procedures. Particular care ought to be taken in crucial areas such as for example selecting the strain index, calculating the overhang load and examining the heat rated capability from the manufacturer.
उपयोग के दौरान सावधानियां
When using a worm reduction gears, the heat produced during the initial period of make use of is high and running-in procedure at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently achieving the performance of the worm reduction gears.
रखरखाव और निरीक्षण
After completing running-in procedure (approximately 50 hours), it’s important to change the lubricating oil and to change the lubricating oil from then on about 1 time per year according to the operation manual offered by the manufacturer.
उत्पाद वर्णन
The Worm Reduction Gear Box is supplied by our company is of supreme quality. Our products are made through the use of premium quality material and enhance technology at our vendors end. They are widely used in a variety of sectors. Our products are often available at an extremely low market prices.
मोटर माउंट फ्रेम विकल्प
टीईसी मोटर्स, वर्म रिड्यूस गियरबॉक्स।
Option A-160 B5 Body, Flange Mount.
Option B-132 B14 
Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and safe operation. High load capability and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox output speed (rpm).
सेवा कारक के आधार पर अनुरोध पर उच्च अनुपात (40:1, 50:1, 60:1, 80:1, 100:1)
विवरण
Wormgears of the VF series are milestones for the industry worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute flexibility is given by the wide selection of several mounting options, shaft configurations and engine interface, all offered as regular. The helicalworm and the doubleworm version, with or without the torque limiter, also add up, creating a highly versatile drive system.
अतिरिक्त जानकारी
एम्प
0.42 ए
क्षमता
84%
हिमाचल प्रदेश
0.12
किलोवाट
0.09
अनुपात
7
आरपीएम
200
तापमान रेटिंग
20 degree C TO 80 degree C
टॉर्कः
4 एनएम
एचएसएन
8483.40.00
वारंटी अवधि
12 महीने
वर्म रिडक्शन गियर दो सीरीज में आते हैं: X और H।
The series X, featuring a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) provides great versatility to suit a broad selection of applications and provides higher efficiency compared to the compact collection XC, where the emphasis is on space efficiency.
Series H offers the same features as series X with an extra plus: a spur equipment pre-stage at the input end provides higher overall performance and a broader range of ratios compared to the X series.
Body sizes 110 and 90 include a cast-iron housing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy steel and ground-finished.
The worm wheel includes a cast iron hub with cast bronze insert. Hollow result shaft comes as standard.
विकल्पों की विस्तृत श्रृंखला उपलब्ध है:
second input, output flange, single or double extension output shaft, torque limiter with through cable, torque arm.
