rotary cutter gearbox
rotary cutter gearbox
RC-twenty Sequence
Technical specs
Torque: 1,750 – three,267 lb.-in.
198 – 369 Nm.
Ratios: one:2.five, 1:2.83
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil 
Cap: 16 oz. (.47 L)
Weight: 34 lbs. (fifteen.4 kg)
Apps
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Collection
RC-30 Sequence
Specs
Torque: 2,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: 1:one.forty seven, 1:1.seventy one, 1:1.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.sixty eight L)
Excess weight: 51 lbs. (23.1 kg)
Purposes
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-fifty one Series
Specs
Torque: 2,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: 1:1.forty seven, 1:1.71, one:one.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.80 L)
Fat: 56 lbs. (twenty five.4 kg)
Applications
Rotary Cutters Rotary Slashers
Gears: Accessible with possibly straight bevel or spiral bevel gearing.
Electricity: Hp & Torque based on AGMA formulation for continuous responsibility plus a services or load course factor.
Shafting: Various dimensional, metallurgical, and warmth-deal with alternatives obtainable.
Bearings: Geardrives obtainable with different bearing lifestyle choices.
Lubrication: Drives accessible with various lubes based on working qualities
Substitute Rotary Cutter gearbox, 40hp rated, one-3/eight”-six spline enter shaft, one.57″ X twelve tapered spline output shaft and 1:1.forty seven speed up ratio. These gearboxes have a sq. housing configuration and are equivalent in mounting and ratio to the round configuration gearboxes. These are first equipment gearboxes on the IM402, IM502 and IM602 sequence rotary cutters which highlighted slip clutch PTO shafts. This gearbox will not fit the IM400, IM500 and IM60 models as they have a sleek input shaft! If your gearbox has a 12 spline output shaft and a 1-3/eight” – six spline enter shaft this gearbox will operate. Bolt pattern is 4-three/four” on middle gap to gap and six-three/4″ centre to middle of bolt gap on diagonal. The mounting holes type a square bolt sample.
rotary cutter gearbox
Would you prefer to research rotary cutter gearbox more?
