مصنوعات کی تفصیل
| مصنوعات کی خصوصیات | تفصیل |
| Product Models | T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25 |
| Maintenance | Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours |
| Lubricant | China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees |
| مصنوعات کی تفصیل | The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries |
| Technical Features | The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities |
| Performance Features | The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force |
| Technical Parameters | Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW |
·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
RFQ
Q:What information should I tell you to confirm speed reducer?
A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.
Q:What if I don’t know which gear reducer I need?
A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q:What should I provide if I want to order NON-STANDERD speed reducers?
A: Drafts, Dimensions, Pictures and samples if possible.
Q:What is the MOQ?
A: It is OK for 1 or small pieces trial order for quality testing.
Q:How long should I wait for the feedback after I send the inquiry?
A: Within 6 hours
Q:What is the payment term?
A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | Maintenance Procedures to Extend the Lifespan of Bevel GearboxesProper maintenance is essential for extending the lifespan of bevel gearboxes. Here are specific procedures to ensure their longevity:
By following these maintenance procedures, bevel gearboxes can maintain optimal performance, minimize downtime, and have an extended operational lifespan. |
|---|
Transmission of Motion at an Angle with Bevel Gearboxes
Bevel gearboxes are designed to transmit motion between intersecting shafts that are positioned at an angle to each other. They accomplish this by using a set of bevel gears, which have teeth that are cut in a conical shape.
When two bevel gears mesh, their teeth engage at the point of contact. As one gear rotates, it drives the other gear, transmitting motion and torque between the shafts. The angle between the shafts and the orientation of the gear teeth determine the direction and speed of motion transfer.
There are two main types of bevel gears commonly 
بیول گیئر باکس کو دوسرے گیئر سسٹمز سے ممتاز کرنا
بیول گیئر باکس اپنی منفرد خصوصیات اور ایپلی کیشنز کی وجہ سے گیئر سسٹم کی دیگر اقسام سے الگ ہیں۔
- تقطیع کا زاویہ: بیول گیئر باکسز کو مخصوص زاویوں پر ایک دوسرے کو کاٹتے ہوئے شافٹ کے درمیان حرکت کی ترسیل کے لیے ڈیزائن کیا گیا ہے، جو انہیں گردشی حرکت کی سمت کو تبدیل کرنے کے لیے مثالی بناتے ہیں۔
- سمت کی تبدیلی: متوازی شافٹ گیئر سسٹم کے برعکس، بیول گیئر باکس حرکت کی سمت کو 90 ڈگری یا دیگر مخصوص زاویوں سے تبدیل کرتے ہیں، جس سے وہ کونوں کے ارد گرد طاقت کو مؤثر طریقے سے منتقل کر سکتے ہیں۔
- کمپیکٹ اور خلائی بچت: بیول گیئر باکس اکثر کمپیکٹ اور جگہ کی بچت کرتے ہیں، جو انہیں گیئر اسمبلی کے لیے محدود کمرے والی ایپلی کیشنز کے لیے موزوں بناتے ہیں۔
- زاویوں کی وسیع رینج: بیول گیئر بکس 90 ڈگری سے زیادہ زاویہ کی ترتیب کو ہینڈل کر سکتے ہیں، پیچیدہ مکینیکل سسٹمز کو ڈیزائن کرنے میں لچک فراہم کرتے ہیں۔
- خصوصی درخواستیں: بیول گیئر باکس عام طور پر ان ایپلی کیشنز میں استعمال ہوتے ہیں جن میں سمت میں تبدیلی کی ضرورت ہوتی ہے، جیسے آٹوموٹیو ڈیفرنشل سسٹم، اسٹیئرنگ میکانزم، پرنٹنگ پریس، اور ایک دوسرے کو ایک دوسرے سے ملانے والی مشینری۔
یہ امتیازی خصوصیات بیول گیئر باکسز کو ایسے منظرناموں کے لیے ایک ورسٹائل انتخاب بناتی ہیں جہاں گردشی حرکت کی سمت کو تبدیل کرنا یا ایک دوسرے کو ایک دوسرے سے ملانے والی شافٹ کے درمیان طاقت کی ترسیل ضروری ہے۔
used in bevel gearboxes:
- Straight Bevel Gears: These gears have straight-cut teeth and are used when the intersecting shafts are at a 90-degree angle. They are the simplest form of bevel gears and provide efficient motion transmission.
- Spiral Bevel Gears: These gears have teeth that are cut at an angle, allowing them to gradually engage and disengage. Spiral bevel gears are used when the intersecting shafts are at angles other than 90 degrees. They provide smoother operation, less noise, and increased load-carrying capacity compared to straight bevel gears.
The precision manufacturing of bevel gear teeth ensures accurate and reliable motion transmission at various angles, making bevel gearboxes suitable for applications that require motion to be transferred between intersecting shafts in non-parallel orientations.
editor by CX 2023-08-29
