China Best Sales Super-Responsive T Series Spiral Bevel Gear Steering Gear Box for Quick Adjustments components of gearbox

توسط | آگوست 29, 2023 | دسته‌بندی نشده

توضیحات محصول

 

ویژگی‌های محصول توضیحات
Product Models T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25
تعمیر و نگهداری Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours
Lubricant China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees
توضیحات محصول The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries
Technical Features The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities
Performance Features The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force
Technical Parameters Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW

·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.

·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.

·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.

·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.

·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.

·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
RFQ

Q:What information should I tell you to confirm speed reducer?

A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.

 

Q:What if I don’t know which gear reducer I need?

A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

 

Q:What should I provide if I want to order NON-STANDERD speed reducers?

A: Drafts, Dimensions, Pictures and samples if possible.

 

Q:What is the MOQ?

A: It is OK for 1 or small pieces trial order for quality testing.

 

Q:How long should I wait for the feedback after I send the inquiry?

A: Within 6 hours

 

Q:What is the payment term?

A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc
 

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample
گیربکس مخروطی

Maintenance Procedures to Extend the Lifespan of Bevel Gearboxes

Proper maintenance is essential for extending the lifespan of bevel gearboxes. Here are specific procedures to ensure their longevity:

  • Regular Inspection: Conduct routine visual inspections to identify signs of wear, damage, or misalignment. Check for unusual noise, vibration, or leaks.
  • روغن کاری: Follow the recommended lubrication schedule and guidelines for the specific gearbox. Ensure the correct type and quantity of lubricant are used.
  • Cleanliness: Keep the gearbox and its surrounding area clean to prevent dirt, debris, and contaminants from entering and causing damage.
  • Tightening and Fasteners: Periodically check and tighten fasteners, bolts, and mounting components. Loose fasteners can lead to misalignment and excessive wear.
  • هم‌ترازی: Ensure proper alignment of the gearbox with connected components. Misalignment can cause increased friction, heat, and wear.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox to identify any overheating issues. Excessive heat can degrade lubricant and components.
  • Seals and Gaskets: Inspect and replace seals and gaskets as needed to prevent leaks and contamination.
  • Gear Tooth Inspection: Periodically check gear teeth for signs of pitting, chipping, or wear. Address any issues promptly to prevent further damage.
  • Vibration Analysis: Implement vibration analysis to detect irregularities in the gearbox’s operation. Unusual vibrations may indicate misalignment or other mechanical issues.
  • Replace Worn Parts: Replace worn or damaged components, such as bearings, gears, and seals, with genuine parts from the manufacturer.
  • Professional Maintenance: Engage qualified technicians for more in-depth inspections and maintenance tasks, especially for complex gearboxes.
  • Operating Conditions: Operate the gearbox within its specified load, speed, and temperature limits to prevent excessive stress and wear.
  • Training: Ensure personnel are trained to operate, maintain, and troubleshoot the gearbox properly.
  • Record Keeping: Maintain detailed records of maintenance activities, inspections, and repairs for reference and future planning.

By following these maintenance procedures, bevel gearboxes can maintain optimal performance, minimize downtime, and have an extended operational lifespan.

گیربکس مخروطی

Transmission of Motion at an Angle with Bevel Gearboxes

Bevel gearboxes are designed to transmit motion between intersecting shafts that are positioned at an angle to each other. They accomplish this by using a set of bevel gears, which have teeth that are cut in a conical shape.

When two bevel gears mesh, their teeth engage at the point of contact. As one gear rotates, it drives the other gear, transmitting motion and torque between the shafts. The angle between the shafts and the orientation of the gear teeth determine the direction and speed of motion transfer.

There are two main types of bevel gears commonly گیربکس مخروطی

تشخیص گیربکس‌های مخروطی از سایر سیستم‌های چرخ‌دنده

گیربکس‌های مخروطی به دلیل ویژگی‌ها و کاربردهای منحصر به فردشان، از سایر انواع سیستم‌های دنده‌ای متمایز می‌شوند:

  • زاویه تقاطع: گیربکس‌های مخروطی برای انتقال حرکت بین شفت‌های متقاطع در زوایای خاص طراحی شده‌اند و آنها را برای تغییر جهت حرکت چرخشی ایده‌آل می‌کنند.
  • تغییر جهت: برخلاف سیستم‌های چرخ‌دنده با شفت موازی، گیربکس‌های مخروطی جهت حرکت را ۹۰ درجه یا سایر زوایای مشخص تغییر می‌دهند و به آنها اجازه می‌دهند تا به طور مؤثر قدرت را در گوشه‌ها منتقل کنند.
  • جمع و جور و کم جا: گیربکس‌های مخروطی اغلب جمع و جور و کم جا هستند و آنها را برای کاربردهایی با فضای محدود برای مونتاژ چرخ دنده مناسب می‌کنند.
  • طیف وسیعی از زوایا: گیربکس‌های مخروطی می‌توانند پیکربندی‌های زاویه‌ای مختلف فراتر از ۹۰ درجه را مدیریت کنند و انعطاف‌پذیری را در طراحی سیستم‌های مکانیکی پیچیده فراهم کنند.
  • کاربردهای تخصصی: گیربکس‌های مخروطی معمولاً در کاربردهایی که نیاز به تغییر جهت دارند، مانند سیستم‌های دیفرانسیل خودرو، مکانیزم‌های فرمان، دستگاه‌های چاپ و ماشین‌آلات با محورهای متقاطع، استفاده می‌شوند.

این ویژگی‌های متمایز، گیربکس‌های مخروطی را به انتخابی همه‌کاره برای سناریوهایی تبدیل می‌کند که در آن‌ها تغییر جهت حرکت چرخشی یا انتقال قدرت بین شفت‌های متقاطع ضروری است.

used in bevel gearboxes:

  • Straight Bevel Gears: These gears have straight-cut teeth and are used when the intersecting shafts are at a 90-degree angle. They are the simplest form of bevel gears and provide efficient motion transmission.
  • Spiral Bevel Gears: These gears have teeth that are cut at an angle, allowing them to gradually engage and disengage. Spiral bevel gears are used when the intersecting shafts are at angles other than 90 degrees. They provide smoother operation, less noise, and increased load-carrying capacity compared to straight bevel gears.

The precision manufacturing of bevel gear teeth ensures accurate and reliable motion transmission at various angles, making bevel gearboxes suitable for applications that require motion to be transferred between intersecting shafts in non-parallel orientations.

China Best Sales Super-Responsive T Series Spiral Bevel Gear Steering Gear Box for Quick Adjustments components of gearbox China Best Sales Super-Responsive T Series Spiral Bevel Gear Steering Gear Box for Quick Adjustments components of gearbox
editor by CX 2023-08-29