Опис продукту
| Характеристики продукту | Опис |
| Product Models | T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25 |
| Maintenance | Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours |
| Мастило | China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees |
| Опис продукту | The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries |
| Technical Features | The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities |
| Performance Features | The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force |
| Technical Parameters | Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW |
·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
Переваги конічних редукторів у конкретних сценаріях
Конічні редуктори пропонують особливі переваги в певних сценаріях, що робить їх кращими за інші типи редукторів:
- Кутова передача: Коли обертальний рух потрібно передавати між валами, що перетинаються під різними кутами, конічні редуктори переважають завдяки своїй здатності змінювати напрямок.
- Компактні простори: Конічні редуктори добре підходять для застосувань з обмеженим простором, оскільки вони можуть розміщуватися у тісних конфігураціях без шкоди для продуктивності.
- Високий крутний момент при 90 градусах: У ситуаціях, що вимагають передачі високого крутного моменту під кутом 90 градусів, конічні редуктори є більш ефективними, ніж інші типи.
- Механізми керування: Конічні редуктори зазвичай використовуються в системах рульового керування транспортних засобів і машин, забезпечуючи плавне та точне керування напрямком.
- Вимоги до складних рухів: Коли машини або обладнання потребують складних схем руху, що включають зміни напрямку та швидкості, конічні редуктори пропонують необхідну універсальність.
- Застосування у важких умовах експлуатації: Конічні редуктори чудово підходять для важких умов експлуатації, де вирішальне значення мають міцність, передача крутного моменту та довговічність.
Специфічна конструкція та можливості конічних редукторів роблять їх кращим вибором у цих сценаріях, сприяючи оптимальній продуктивності та ефективності в різних промислових застосуваннях.
Efficient Power Transmission and Torque Transfer with Bevel Gearboxes
Bevel gearboxes are designed to ensure efficient power transmission and torque transfer in various mechanical systems. Here’s how they contribute to these aspects:
- Multiple Gear Teeth Engagement: Bevel gearboxes typically have multiple gear teeth in contact simultaneously, distributing the load across a larger surface area. This feature enhances torque-carrying capacity and minimizes wear, resulting in efficient torque transfer.
- High Gear Ratio: Bevel gearboxes can achieve high gear ratios, allowing them to convert high-speed, low-torque input into low-speed, high-torque output. This capability is valuable for applications requiring precise control over rotational speed and force.
- Smooth Motion Transfer: The meshing of bevel gears ensures smooth and continuous motion transfer between intersecting shafts. This is essential for maintaining consistent power transmission and reducing vibration or noise.
- Optimized Gear Tooth Design: Bevel gear teeth are carefully engineered with specific profiles and angles to minimize friction and maximize contact area. This design optimization enhances the efficiency of torque transfer while reducing energy losses due to friction.
- Precise Machining and Alignment: Precision machining and proper alignment of bevel gears within the gearbox contribute to efficient power transmission. Accurate gear meshing reduces the likelihood of backlash and ensures minimal energy wastage.
Bevel gearboxes are chosen for applications where efficient power transmission, precise torque transfer, and reliable motion control are essential requirements.
Primary Applications of Bevel Gearboxes in Different Industries
Bevel gearboxes find widespread use across various industries due to their ability to change the direction of rotational motion and transmit torque efficiently. Some of the primary applications of bevel gearboxes in different industries include:
- Automotive Industry: Bevel gearboxes are commonly used in automotive differentials to distribute torque between the wheels and allow for smooth cornering. They also play a crucial role in transferring power between the engine and the wheels.
- Industrial Manufacturing: Bevel gearboxes are utilized in machine tools, such as milling machines and lathes, to transmit power and motion between different components. They are also found in conveyor systems and material handling equipment.
- Construction and Heavy Equipment: Bevel gearboxes are integrated into construction equipment like cranes, bulldozers, and excavators to change the direction of motion and transfer torque for various operations.
- Marine Industry: Bevel gearboxes are used in marine applications, such as ship propulsion systems and steering mechanisms, to redirect power and motion efficiently.
- Power Generation: Bevel gearboxes are employed in power plants to transmit rotational motion and torque between different components of generators and turbines.
- Aerospace Industry: Bevel gearboxes are used in aerospace applications for functions like adjusting the pitch of aircraft propellers and controlling the movement of landing gear.
- Mining and Quarrying: Bevel gearboxes are used in mining machinery to transfer power and torque to conveyor belts, crushers, and other equipment.
- Agricultural Machinery: Bevel gearboxes are found in agricultural equipment like tractors and harvesters to drive different components and attachments.
The versatile nature of bevel gearboxes makes them suitable for a wide range of industries where efficient torque transmission and directional changes are essential for optimal operation.
editor by CX 2023-11-29
