제품 설명
| 제품 특징 | 설명 |
| Product Models | T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25 |
| Maintenance | Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours |
| Lubricant | China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees |
| 제품 설명 | The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries |
| Technical Features | The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities |
| Performance Features | The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force |
| Technical Parameters | Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW |
·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
| 애플리케이션: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| 경도: | 경화된 치아 표면 |
| 설치: | Horizontal Type |
| Step: | Three-Step |
| 샘플: |
US$ 100/Piece
1개 (최소 주문 수량) | |
|---|
특정 상황에서 베벨 기어박스의 장점
베벨 기어박스는 특정 상황에서 뚜렷한 장점을 제공하기 때문에 다른 유형의 기어박스보다 선호됩니다.
- 각도 전달: 서로 다른 각도로 교차하는 축 사이에 회전 운동을 전달해야 할 때, 방향 전환 능력이 뛰어난 베벨 기어박스가 탁월한 성능을 발휘합니다.
- 협소한 공간: 베벨 기어박스는 성능 저하 없이 좁은 공간에도 설치할 수 있으므로 공간이 제한적인 용도에 적합합니다.
- 90도 각도에서 높은 토크 발생: 90도 각도로 높은 토크를 전달해야 하는 상황에서는 베벨 기어박스가 다른 유형보다 효율적입니다.
- 조향 메커니즘: 베벨 기어박스는 차량 및 기계의 조향 시스템에 일반적으로 사용되며 부드럽고 정확한 방향 제어를 제공합니다.
- 복잡한 동작 요구 사항: 기계나 장비가 방향과 속도 변화를 수반하는 복잡한 동작 패턴을 필요로 할 때, 베벨 기어박스는 필요한 다용성을 제공합니다.
- 고강도 작업용: 베벨 기어박스는 견고성, 토크 전달 및 내구성이 중요한 고하중 환경에서 탁월한 성능을 발휘합니다.
베벨 기어박스의 특수한 설계와 기능은 이러한 시나리오에서 선호되는 선택이 되게 하며, 다양한 산업 분야에서 최적의 성능과 효율성을 제공하는 데 기여합니다.
Efficient Power Transmission and Torque Transfer with Bevel Gearboxes
Bevel gearboxes are designed to ensure efficient power transmission and torque transfer in various mechanical systems. Here’s how they contribute to these aspects:
- Multiple Gear Teeth Engagement: Bevel gearboxes typically have multiple gear teeth in contact simultaneously, distributing the load across a larger surface area. This feature enhances torque-carrying capacity and minimizes wear, resulting in efficient torque transfer.
- High Gear Ratio: Bevel gearboxes can achieve high gear ratios, allowing them to convert high-speed, low-torque input into low-speed, high-torque output. This capability is valuable for applications requiring precise control over rotational speed and force.
- Smooth Motion Transfer: The meshing of bevel gears ensures smooth and continuous motion transfer between intersecting shafts. This is essential for maintaining consistent power transmission and reducing vibration or noise.
- Optimized Gear Tooth Design: Bevel gear teeth are carefully engineered with specific profiles and angles to minimize friction and maximize contact area. This design optimization enhances the efficiency of torque transfer while reducing energy losses due to friction.
- Precise Machining and Alignment: Precision machining and proper alignment of bevel gears within the gearbox contribute to efficient power transmission. Accurate gear meshing reduces the likelihood of backlash and ensures minimal energy wastage.
Bevel gearboxes are chosen for applications where efficient power transmission, precise torque transfer, and reliable motion control are essential requirements.
Primary Applications of Bevel Gearboxes in Different Industries
Bevel gearboxes find widespread use across various industries due to their ability to change the direction of rotational motion and transmit torque efficiently. Some of the primary applications of bevel gearboxes in different industries include:
- Automotive Industry: Bevel gearboxes are commonly used in automotive differentials to distribute torque between the wheels and allow for smooth cornering. They also play a crucial role in transferring power between the engine and the wheels.
- Industrial Manufacturing: Bevel gearboxes are utilized in machine tools, such as milling machines and lathes, to transmit power and motion between different components. They are also found in conveyor systems and material handling equipment.
- Construction and Heavy Equipment: Bevel gearboxes are integrated into construction equipment like cranes, bulldozers, and excavators to change the direction of motion and transfer torque for various operations.
- Marine Industry: Bevel gearboxes are used in marine applications, such as ship propulsion systems and steering mechanisms, to redirect power and motion efficiently.
- Power Generation: Bevel gearboxes are employed in power plants to transmit rotational motion and torque between different components of generators and turbines.
- Aerospace Industry: Bevel gearboxes are used in aerospace applications for functions like adjusting the pitch of aircraft propellers and controlling the movement of landing gear.
- Mining and Quarrying: Bevel gearboxes are used in mining machinery to transfer power and torque to conveyor belts, crushers, and other equipment.
- Agricultural Machinery: Bevel gearboxes are found in agricultural equipment like tractors and harvesters to drive different components and attachments.
The versatile nature of bevel gearboxes makes them suitable for a wide range of industries where efficient torque transmission and directional changes are essential for optimal operation.
editor by CX 2023-11-29
