• Electric motor gearboxes are maintenance-free, small power sources for driving vent, display screen, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase choices for your own needs.
• Key feature of the drives certainly are a self-braking worm gear transmission and a built-in linear limit switch device.
shaft-mounted gear motors are total electromechanical drives where the speed of the installed electrical motor is decreased to the desired value using two to four reduction stages. The drives are powerful and durable and show a concise and lightweight design.
The compact design is manufactured possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent weight-loss compared to commercially obtainable drive motors. That is achieved through the consistent application of aluminium die casting technology, which ensures a high degree of rigidity for the gear and motor housing concurrently.
Each drive is produced and tested specifically for every order and customer. A sophisticated modular system permits an excellent diversity of types and a optimum amount of customization to client requirements.
Thanks to their integrated control products, the shaft-mounted equipment motors will be the ideal drives for applications in reversing setting. In both rotation directions, defined end positions are guarded by two position limit switches. This uncomplicated solution does not only simplify the cabling, but also makes it possible to configure the finish positions efficiently. The high shut-off precision of the limit switches ensures safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It is connected with a metal shaft to turn the pinions for greenhouse ventilation. With the support of electric panel, it could run and then stop after set quantity of turns. After that it can open and close the windows for greenhouse ventilation to correct positions.
To keep up the delicate environment inside a greenhouse, environment control systems are a necessity. Numerous mechanical systems could be applied in this respect; however cup vent drive systems tend to be the most popular. The drive system contains a central gearmotor connected to a 40:1 correct angle reducer with dual result shafts. These OP shafts hook up to lengthy jack shafts that spread across the roof type of the greenhouse connecting to multiple rack and pinion mechanisms that open and close large cup window panes in the ceiling for temperature control.
Based on the size of the application form (length of the shafting, volume and weight of the window panes) we provides two gearmotor solutions from a modified version of their 200 series parallel shaft line – 1/5 HP and 1/20 HP. The application Is generally intermittent used; however the motors are rated continuous since the glass pane windows may potentially be under continuous, subtle adjustment during the day.
Gear Motor, also referred to as Motor Gearboxes, is a 
specific kind of electrical motor that’s designed to produce high torque whilst maintaining a minimal horsepower, or low quickness, motor output. Equipment motors are available in many different applications, specifically for the greenhouse, livestock and agricultural industry, our motors can be found options to operate roof vents, wall vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be easily taken out without disturbing the whole shaft.
shaft-mounted gear motors are complete electromechanical drives where the speed of the installed electrical motor is decreased to the required value using two to four reduction stages. The drives are high performance and durable and feature a concise and lightweight design.
Right here is a lot more details on this subject greenhouse gear motor
