Descrição do produto
| Características do produto | Descrição |
| Product Models | T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25 |
| Maintenance | Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours |
| Lubrificante | China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees |
| Descrição do produto | The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries |
| Technical Features | The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities |
| Performance Features | The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force |
| Technical Parameters | Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW |
·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CZPT and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
RFQ
Q:What information should I tell you to confirm speed reducer?
A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.
Q:What if I don’t know which gear reducer I need?
A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q:What should I provide if I want to order NON-STANDERD speed reducers?
A: Drafts, Dimensions, Pictures and samples if possible.
Q:What is the MOQ?
A: It is OK for 1 or small pieces trial order for quality testing.
Q:How long should I wait for the feedback after I send the inquiry?
A: Within 6 hours
Q:What is the payment term?
A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
Role of Spiral Bevel Gearboxes in Automotive and Aerospace Industries
Automotive Industry: Spiral bevel gearboxes have significant roles in the automotive sector:
a. Differential Systems: In vehicles, spiral bevel gearboxes are a key component of the differential system. They enable the distribution of torque between the left and right wheels while allowing them to rotate at different speeds during turns. This improves stability, traction, and maneuverability.
b. Transmissions: Spiral bevel gearboxes are also used in some manual transmissions. They help in transferring power and torque efficiently between the engine and the wheels, contributing to smooth gear shifting and overall vehicle performance.
c. Power Steering: In power steering systems, spiral bevel gearboxes assist in translating the rotational movement of the steering wheel into lateral movement of the wheels. This makes steering easier for the driver.
Aerospace Industry: In the aerospace sector, spiral bevel gearboxes have crucial roles:
a. Landing Gear Systems: Aircraft landing gear systems use spiral bevel gearboxes to control the extension and retraction of landing gear during takeoff and landing. These gearboxes ensure precise and synchronized movement, contributing to safe landings and takeoffs.
b. Flight Control Systems: Spiral bevel gearboxes are used in flight control systems to translate pilot inputs into controlled movements of control surfaces such as ailerons, elevators, and rudders. They ensure accurate and responsive control of the aircraft.
c. Engine Accessory Drives: Some aircraft engines utilize spiral bevel gearboxes to transfer power from the engine to various accessories such as generators, hydraulic pumps, and compressors. These gearboxes ensure efficient power distribution and operation of essential systems.
Spiral bevel gearboxes are crucial in both the automotive and aerospace industries, contributing to vehicle performance, safety, and overall functionality.
Materials for Manufacturing Spiral Bevel Gearboxes
Spiral bevel gearboxes are typically constructed using a variety of materials to ensure durability, strength, and reliable performance. Commonly used materials include:
- Steel Alloys: High-quality steel alloys, such as alloy steels or carburizing steels, are commonly used due to their excellent combination of strength, wear resistance, and toughness.
- Bronze Alloys: Bronze alloys, often used for gear teeth and bushings, offer good friction properties and self-lubricating characteristics.
- Cast Iron: Cast iron can be used for the housing or casing of spiral bevel gearboxes due to its excellent damping properties and resistance to wear and corrosion.
- Aluminum Alloys: In some cases, lightweight aluminum alloys are used to construct certain components of the gearbox to reduce overall weight.
- Stainless Steel: Stainless steel may be employed for components exposed to corrosive environments or for applications requiring high levels of cleanliness.
- Heat-Treated Steels: Heat treatment processes like case hardening, quenching, and tempering can enhance the hardness and strength of gear components.
The choice of material depends on factors such as the intended application, load conditions, operating environment, and the specific performance requirements of the gearbox.
Principles of Spiral Bevel Gear Meshing
Spiral bevel gears operate based on the principles of involute gearing and the meshing of angled teeth. Here’s how the gear meshing process works:
- Involute Profile: Like other gear types, spiral bevel gears have involute profiles on their gear teeth. This profile ensures smooth and gradual tooth engagement during meshing, reducing impact and wear.
- Curved Tooth Surface: The gear teeth on spiral bevel gears are curved along the face width, allowing for gradual and continuous contact as the gears rotate. This design minimizes abrupt changes in contact and reduces noise and vibration.
- Intersecting Axes: Spiral bevel gears have axes that intersect at a right angle. This arrangement allows power transmission between two perpendicular shafts, making them suitable for applications requiring changes in direction.
- Angular Tooth Orientation: The main feature of spiral bevel gears is their angled tooth orientation. Each gear tooth has both radial and axial angles, which contribute to smoother tooth engagement and reduced sliding friction.
- Curved Tooth Alignment: As the gears rotate, the curved surfaces of the teeth align in a way that enables gradual meshing. This results in a rolling contact motion, unlike the sliding contact motion found in straight bevel gears.
- Constant Contact Ratio: The unique geometry of spiral bevel gears maintains a constant contact ratio throughout the gear meshing cycle. This consistent contact ratio ensures smooth operation and even distribution of load.
Overall, the principles of spiral bevel gear meshing lead to quieter operation, improved efficiency, and greater load-carrying capacity compared to other types of bevel gears.
editor by CX 2023-09-04
