Single and double reduction planetary equipment drives to be used with electric, hydraulic, air motors or mechanical power input from high acceleration, low torque sources to deliver reduced speeds at increased torques. The input side has regular SAE pads for engine mounting. Obtainable in the three output configurations proven below. Many units could be furnished with an intrinsic parking brake.
One reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input acceleration is bound to 2500 RPM.The same torque is available in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Models provide 95% power transmitting efficiency.
Wheel Drive
Input side has regular SAE pads and hydraulic planetary drive splined insight. Output part has hub for installation automobile wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is standard on all wheel drives.
Shaft Output
Input side standard SAE pads with splined input. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and heat treated ring gear to reduce backlash growth caused by wear. The external bearing nut supplies the greatest in shaft retention and shaft power. Output could be a spindle shaft or numerous sizes of essential pinion gears.
