pto gearbox
2) Loosen the bolts only when fitting the shafts. DO NOT get rid of the bolts fully. If removed they may possibly fall into 
the
housing and result in a failure. The box must be disassembled to retrieve the bolts if this happens.
1) Tighten bolts to avoid oil leaking throughout procedure. (The bolts have a seal below their heads.)
Take care when tightening the 4 x l
ocking bolts within the housing. These bolts correct the removable splined shafts in area.
Be aware: When fitting splined shafts.
Simply click on drawing to enlarge.
1:1.85 pace increaser with thirteen/four”Z20 splined output shaft.
For any type of inquiries regarding pto gearbox, call us on our web site.
