worm motor
A robust worm-travel gearbox powered by an MM28 electric motor. Ideal applications where an easy to match, high torque output is required. Ideal for student based assignments including robots and buggies.
The unit has been designed so that the output shaft could be ‘clicked’ in and out for modification. E.g. cutting down to size. The electric motor is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where high torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, actually at very low voltages. We recommend that you use stall-detection sensors, or just check out your robot, to ensure that it doesn\u2019t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on small threaded end of the shaft, though it is not specifically intended to work with this kind of shaft (the hub\u2019s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct angle worm geared motors arranged new standards for reliability, performance and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration right now and a truly future proof solution. The Ever-Power gear electric motor offers total flexibility in mounting options includes shaft, base, face, and flange alternatives. The engine terminal box can be mounted in alternate positions rotated in 90\u00ba steps around the electric motor frame offering for unparalleled integration opportunities.
Ever-Power gear motors adhere to North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total alternative for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outside or in wet and dusty conditions without the usage of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Caracter\u00edsticas do produto
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50\/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the option for applications requiring a good corner turn, optional dual output, or an inability for the electric motor to be back again driven. The DC correct angle equipment motors are created for constant and intermittent duty procedure. Our right angle equipment reducers are designed with many mounting plate options, making them ideal for a number of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1\/43 to 3\/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a little package size. Worm Equipment Motors are excellent for applications that want a personal- locking or breaking characteristic since the output shaft can\u2019t rotate when there\u2019s no power used. On top of that, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision slice gears, voltages and sizes, EP Items includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking \/ Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks \/ Industrial Conveying Systems \/ Security Gates \/ Teeth Chair \/ Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Items will continue to work with you to create and produce a Worm Gear Electric motor that may optimize the efficiency of your unique application.
Built to your specific requirements
Engine Type: Brushed \/ Brushless \/ Coreless
Voltage
Output Speed
Poder
Current
Torque
Reduction Ratio
Shaft Material & Size
Material da engrenagem
Shaft Configuration: (D Trim \/ Round \/ Splined \/ Other)
General Size Parameters (L, W, H)
Encoder Type: Optical \/ Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm electric motor runs on the metal gear box for durability and a higher torque output. Due to the special mechanical structure of the worm get the engine output shaft is self locking and will not be rotated.
This part runs on the two wire connection and supports direction control in addition to PWM speed control. Rated voltage is 12v and can obtain 40RPM, with a torque of 8kg\/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg\/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially show their strength in applications where large gear ratios are necessary. Our worm geared motors will be therefore optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each one of these has its unique requirements. The EP series worm gear motors can be quickly and effectively adapted to satisfy your needs.
Worm gear devices impress with their high power density and compact design. If required, we can also source them with the impressive nsd tupH surface area treatment.
In addition to the basic EP housing, we offer an extensive line of bolt-on components to customize the merchandise including torque arms, shaft addresses and output flanges. These could be easily field installed, but we may also be pleased to assemble the average person components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear systems feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for harsh and challenging industries like food processing and pharmaceuticals.
Versatile input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides different repairing possibilities and enable an easy assembling for the client.
Various other drive configurationscan be designed by use of built-on accessories (e.g. torque arm and result flanges). The housings are made in light weight construction out of aluminium die cast. Electric motor attachment is realised in general by way of IEC adapter B5 or B14A.
Dados t\u00e9cnicos
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly\/installation:uniblock, flange, torque arm
Buy Worm Get Gearbox with Motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm simply no load speed, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm extensive, 40mm high, a good robust worm drive gearbox powered by an MM28 engine (included), most ideal for applications where a simple to match, high torque output is required, nylon housing and gear, requires light oil or silicon grease lubrication, perfect for student based projects including robots and buggies.
Most suitable for applications where an easy to match, high torque productivity is required
Perfect for student based projects including robots and buggies
Reversible Substantial torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Caracter\u00edsticas:
The motor is Gear DC electric motor with micro-turbine worm, you can
![\"\"](\"http:\/\/gearboxes-worm.xyz\/wp-content\/uploads\/2020\/03\/worm-motor.jpg\" "\\"\\"")
transform the wiring-connection to change motor rotation.Turbo worm geared motor with self-lock, that’s, in the case of motor without electric, the end result axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r\/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where huge holding torque’s engine is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. How come worm gear so special? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the path of transmission (input shaft vs output shaft) isn’t reversible when working with large reduction ratios, because of the increased friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This can often be a advantage when it is desired to eliminate any likelihood of the result driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g<\/p>\n