This collar has a quick-clamping design to make frequent adjustments using a lever handle instead of tools. It is ideal for applications that require quick alterations and procedure tuning such as adjusting guidebook rails or locating pieces. It is made of lightweight aluminum with an anodized finish that increases the metal’s use and corrosion tolerant properties and boosts its surface hardness, holding power, and 
overall look. This collar posseses an aluminum lever manage with a gold anodized finish for speedy installation and relieve of the collar. The functioning temperatures for this collar range from -40 to 93 degrees C (-40 to 200 degrees F). This shaft collar is suitable for use in various applications, including in the motor vehicle industry to situate components in automobile electrical power steering assemblies, the developing industry to locate components on a conveyor belt system, and the hobby craft market to hold wheels on axles in remote control vehicles, among others.
Shaft collars happen to be ring-shaped devices primarily used to secure pieces onto shafts. In addition they provide as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars will be clamping (or split) collars, that can come in one- or two-piece styles, and setscrew collars. In both types, a number of screws hold the collars set up on the shaft. In setscrew collars, screws happen to be tightened through the collar until they press directly against the shaft, and in clamping collars, screws will be tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars should be mounted by sliding the collar over the finish of the shaft, while two-piece clamping collars individual into two halves and may be installed between pieces on the shaft. Shaft collars are manufactured from an array of materials including zinc-plated metal, light weight aluminum, nylon, and neoprene. Found in nearly every type of machinery and industry, shaft collars are used in applications including gearbox assemblies, motor bases, equipment tools, travel shafts, agricultural implements, medical apparatus, and paper and metal mill equipment, amongst others.
EPT manufactures shaft collars, rigid couplings, and zero-backlash action control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Chemicals (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemical compounds (REACH) standards.
One-piece clamping shaft collar for applications requiring a far more uniform holding vitality and bigger axial load capacity than setscrew collars
Quick-clamping collar design to make frequent adjustments without tools
Aluminum with an anodized surface finish for greater corrosion resistance, wear resistance, and surface hardness than plain aluminum
Includes an aluminium lever deal with with a precious metal anodized finish for quick installation and release of the collar
Operating temperatures range from -40 to 93 degrees C (-40 to 200 degrees F)
Shaft collars are cast aluminium china commonly used as courses, spacers, mechanical stops, and for component alignment in a shaft. They are one of the most typical power transmission ingredients and are found on products in most industries.
