제품 설명
Bevel helical gearbox with permanent magnet synchronous motor integrate variable frequency driver for conveyor
SNKG Series prorduct adopt harden teeth surface bevel gear and helical gear to drive, following the design principle of modularization , FEA analyse technology, unique low-noise gear tooth profile, with the characteristics of compact volume, high load performance and stable running, reliability and long service life.
Key Benefits
-Simple wiring, low cost
-Large amount of data, fast speed, 100m, data transmission is 500K
-All control units have the same condition, it means each node has the same rights to occupy the bus (send and receive)
-Communication rate meets control requirements, communication data amount supports required data reading.
-Electric eye and proximity switch sensor supply signal to the driver directly, it is convenient and reliable.
회사 소개
ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.
Packing
Delivery
| 애플리케이션: | Motorcycle, Machinery, Marine, Agricultural Machinery, Ceramic |
|---|---|
| 경도: | 경화된 치아 표면 |
| 설치: | Horizontal Type |
| Layout: | Corner |
| Gear Shape: | Helical Gear |
| Step: | Single-Step |
| 샘플: |
US$ 569/Piece
1개 (최소 주문 수량) | |
|---|
| 맞춤 설정: |
사용 가능
| 맞춤형 요청 |
|---|
Distinguishing Bevel Gearboxes from Other Gear Systems
Bevel gearboxes stand out from other types of gear systems due to their unique characteristics and applications:
- Angle of Intersection: Bevel gearboxes are designed to transmit motion between intersecting shafts at specific angles, making them ideal for changing the direction of rotational motion.
- Direction Change: Unlike parallel shaft gear systems, bevel gearboxes change the direction of motion by 90 degrees or other specified angles, allowing them to efficiently transmit power around corners.
- Compact and Space-Saving: Bevel gearboxes are often compact and space-saving, making them suitable for applications with limited room for gear assembly.
- Wide Range of Angles: Bevel gearboxes can handle various angle configurations beyond 90 degrees, providing flexibility in designing complex mechanical systems.
- Specialized Applications: Bevel gearboxes are commonly used in applications requiring changes in direction, such as automotive differential systems, steering mechanisms, printing presses, and machinery with intersecting axes.
These distinguishing features make bevel gearboxes a versatile choice for scenarios where changing the direction of rotational motion or transmitting power between intersecting shafts is essential.
Proper Installation and Alignment of Bevel Gearboxes
Installing and aligning a bevel gearbox correctly is essential to ensure its optimal performance and longevity. Here are the steps typically involved in the process:
- Preparation: Before installation, thoroughly clean the mounting surfaces of both the gearbox and the driven equipment to ensure proper contact. Check that all components are in good condition and free from damage.
- Positioning: Carefully position the gearbox and the driven equipment according to the manufacturer’s specifications and the intended orientation of the bevel gears.
- 조정: Use precision alignment tools, such as dial indicators or laser alignment systems, to ensure accurate alignment of the bevel gears. The goal is to achieve proper concentricity and parallelism between the input and output shafts of the gearbox.
- Bolt and Fasten: Securely bolt and fasten the gearbox to the mounting surface. Use appropriate torque settings as recommended by the manufacturer to ensure proper clamping force without overloading the fasteners.
- 매끄럽게 하기: Apply the recommended lubricant to the bevel gears and other relevant components according to the manufacturer’s guidelines. Proper lubrication is crucial for reducing friction and wear during operation.
- Testing: After installation, perform a thorough functional test of the bevel gearbox. Check for any abnormal noise, vibration, or overheating during operation. Ensure that the gearbox operates smoothly and efficiently under different load conditions.
- Monitoring: Regularly monitor the performance of the bevel gearbox through routine inspections and maintenance. Keep an eye out for any signs of misalignment, wear, or other issues that may affect performance.
It’s important to follow the manufacturer’s installation and alignment guidelines closely, as proper installation practices contribute to the reliable and efficient operation of the bevel gearbox.
베벨 기어박스에서 베벨 기어에 의한 회전 운동 방향 변경
베벨 기어박스에 사용되는 베벨 기어는 교차하는 축 사이의 회전 운동 방향을 바꾸도록 특별히 설계되었습니다. 베벨 기어는 톱니 프로파일의 독특한 기하학적 구조를 활용하여 축이 90도가 아닌 각도로 위치하더라도 부드럽고 효율적으로 회전 운동을 전달할 수 있습니다.
두 개의 베벨 기어가 맞물리면, 기어의 톱니가 서로 맞물려 한 기어에서 다른 기어로 회전력을 전달합니다. 기어 배열에 따라 회전 방향을 입력축에서 출력축으로 또는 그 반대로 바꿀 수 있습니다. 예를 들어, 직선 베벨 기어 배열에서는 기어가 90도 각도로 배치되고 입력축과 출력축이 서로 수직입니다. 입력 기어가 회전하면 그 운동 에너지가 출력 기어로 전달되어 두 축의 회전 방향이 바뀝니다.
나선형 베벨 기어와 같은 더욱 복잡한 구조에서는 톱니가 나선형 패턴으로 설계되어 더욱 부드러운 맞물림과 우수한 하중 분산을 가능하게 합니다. 따라서 이러한 기어는 더 높은 토크와 효율이 요구되는 용도나 축이 90도가 아닌 각도로 배치되는 용도에 적합합니다.
요약하자면, 베벨 기어박스의 베벨 기어는 다양한 기계 시스템 및 산업 응용 분야에서 필요에 따라 회전 방향을 변경하면서 교차하는 축 사이에서 회전 운동과 동력을 전달할 수 있도록 하는 필수 구성 요소입니다.
editor by CX 2023-10-30
