제품 설명
Bevel helical gearbox with Permanent magnet synchronous motor integrate variable frequency driver for conveyor
SNKG Series prorduct adopt harden teeth surface bevel gear and helical gear to drive, following the design principle of modularization , FEA analyse technology, unique low-noise gear tooth profile, with the characteristics of compact volume, high load performance and stable running, reliability and long service life.
Key Benefits
-Simple wiring, low cost
-Large amount of data, fast speed, 100m, data transmission is 500K
-All control units have the same condition, it means each node has the same rights to occupy the bus (send and receive)
-Communication rate meets control requirements, communication data amount supports required data reading.
-Electric eye and proximity switch sensor supply signal to the driver directly, it is convenient and reliable.
회사 소개
ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of CHINAMFG
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.
Packing
Delivery
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Helical Bevel |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Single-Step |
| Samples: |
US$ 569/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
특정 상황에서 베벨 기어박스의 장점
베벨 기어박스는 특정 상황에서 뚜렷한 장점을 제공하기 때문에 다른 유형의 기어박스보다 선호됩니다.
- 각도 전달: 서로 다른 각도로 교차하는 축 사이에 회전 운동을 전달해야 할 때, 방향 전환 능력이 뛰어난 베벨 기어박스가 탁월한 성능을 발휘합니다.
- 협소한 공간: 베벨 기어박스는 성능 저하 없이 좁은 공간에도 설치할 수 있으므로 공간이 제한적인 용도에 적합합니다.
- 90도 각도에서 높은 토크 발생: 90도 각도로 높은 토크를 전달해야 하는 상황에서는 베벨 기어박스가 다른 유형보다 효율적입니다.
- 조향 메커니즘: 베벨 기어박스는 차량 및 기계의 조향 시스템에 일반적으로 사용되며 부드럽고 정확한 방향 제어를 제공합니다.
- 복잡한 동작 요구 사항: 기계나 장비가 방향과 속도 변화를 수반하는 복잡한 동작 패턴을 필요로 할 때, 베벨 기어박스는 필요한 다용성을 제공합니다.
- 고강도 작업용: 베벨 기어박스는 견고성, 토크 전달 및 내구성이 중요한 고하중 환경에서 탁월한 성능을 발휘합니다.
베벨 기어박스의 특수한 설계와 기능은 이러한 시나리오에서 선호되는 선택이 되게 하며, 다양한 산업 분야에서 최적의 성능과 효율성을 제공하는 데 기여합니다.
Maintenance Procedures to Extend the Lifespan of Bevel Gearboxes
Proper maintenance is essential for extending the lifespan of bevel gearboxes. Here are specific procedures to ensure their longevity:
- Regular Inspection: Conduct routine visual inspections to identify signs of wear, damage, or misalignment. Check for unusual noise, vibration, or leaks.
- 매끄럽게 하기: Follow the recommended lubrication schedule and guidelines for the specific gearbox. Ensure the correct type and quantity of lubricant are used.
- Cleanliness: Keep the gearbox and its surrounding area clean to prevent dirt, debris, and contaminants from entering and causing damage.
- Tightening and Fasteners: Periodically check and tighten fasteners, bolts, and mounting components. Loose fasteners can lead to misalignment and excessive wear.
- 조정: Ensure proper alignment of the gearbox with connected components. Misalignment can cause increased friction, heat, and wear.
- Temperature Monitoring: Monitor the operating temperature of the gearbox to identify any overheating issues. Excessive heat can degrade lubricant and components.
- Seals and Gaskets: Inspect and replace seals and gaskets as needed to prevent leaks and contamination.
- Gear Tooth Inspection: Periodically check gear teeth for signs of pitting, chipping, or wear. Address any issues promptly to prevent further damage.
- Vibration Analysis: Implement vibration analysis to detect irregularities in the gearbox’s operation. Unusual vibrations may indicate misalignment or other mechanical issues.
- Replace Worn Parts: Replace worn or damaged components, such as bearings, gears, and seals, with genuine parts from the manufacturer.
- Professional Maintenance: Engage qualified technicians for more in-depth inspections and maintenance tasks, especially for complex gearboxes.
- Operating Conditions: Operate the gearbox within its specified load, speed, and temperature limits to prevent excessive stress and wear.
- Training: Ensure personnel are trained to operate, maintain, and troubleshoot the gearbox properly.
- Record Keeping: Maintain detailed records of maintenance activities, inspections, and repairs for reference and future planning.
By following these maintenance procedures, bevel gearboxes can maintain optimal performance, minimize downtime, and have an extended operational lifespan.
베벨 기어박스의 종류 및 분류
베벨 기어박스는 다양한 유형이 있으며, 각각 특정 용도와 요구 사항에 맞게 설계되었습니다. 기어 배열, 축 방향 및 사용 목적과 같은 요소에 따라 분류됩니다. 일반적인 베벨 기어박스 유형은 다음과 같습니다.
- 직선형 베벨 기어박스: 이 기어박스는 직선 베벨 기어를 사용하며 90도 각도로 교차하는 축 사이에서 동력을 전달하는 데 적합합니다.
- 스파이럴 베벨 기어박스: 이러한 기어박스는 스파이럴 베벨 기어를 사용하며, 교차하는 축이 90도가 아닌 각도를 이룰 때 사용됩니다. 더욱 부드러운 작동과 높은 하중 용량을 제공합니다.
- 사선 베벨 기어박스: 사선 베벨 기어박스에서는 입력축과 출력축의 축이 평행하지 않거나 교차하지 않습니다. 이러한 기어박스는 평행하지 않고 교차하지 않는 축을 연결해야 하는 용도에 사용됩니다.
- 앵귤러 베벨 기어박스: 앵귤러 베벨 기어박스는 특정 각도로 축을 연결하도록 설계되었으며, 필요한 축 각도가 표준 베벨 기어 구성과 다른 응용 분야에서 자주 사용됩니다.
베벨 기어박스의 분류는 기어 톱니와 축의 배열 및 방향을 기준으로 합니다. 제조업체들은 다양한 산업적 요구에 맞춰 여러 각도에서 효율적인 동력 전달을 보장하는 다양한 설계를 제공합니다.
editor by CX 2024-04-24
