Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air flow Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric engine, capacitor and quickness control change is still installed nevertheless the cord itself is generally detached as seen in the photos. (Find “Control Notice” below for alter type.)
T (See “Software Notice” below for utilize in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate engine electric fan motor china speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you have a pull-chain). If you order several electric motor at a time, we will do our better to supply your order with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric engine in a nonfan application. This is a totally enclosed fan electric electric motor and made to have constant ventilation over the engine casing for cooling. The housing isn’t vented and the electric powered electric motor will overheat and enter automated thermal overload if run in a nonfan system where there isn’t solid ventilation past the electric motor. (Caution Note: the electric 
motor will restart immediately when it cools cool off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans may possibly also overload the electric motor and cause it to proceed into automated thermal overload. (Your lover blade from another manufacturer may have a steeper blade position.)
Origin: This electric motor is produced in China.
