motor de tornillo sin fin
A robust worm-travel gearbox powered by an MM28 electric motor. Ideal applications where an easy to match, high torque output is required. Ideal for student based assignments including robots and buggies.
The unit has been designed so that the output shaft could be ‘clicked’ in and out for modification. E.g. cutting down to size. The electric motor is snap fitted into its cradle to activate the apparatus and worm.
Detalles
1 \u2013 6 V CC
De 0,1 A a 1 A seg\u00fan la carga.
Longitud del eje de transmisi\u00f3n: 12,5 cm
Di\u00e1metro del eje de transmisi\u00f3n: 3 mm
Relaci\u00f3n de la caja de cambios: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where high torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, actually at very low voltages. We recommend that you use stall-detection sensors, or just check out your robot, to ensure that it doesn\u2019t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on small threaded end of the shaft, though it is not specifically intended to work with this kind of shaft (the hub\u2019s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct angle worm geared motors arranged new standards for reliability, performance and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration right now and a truly future proof solution. The Ever-Power gear electric motor offers total flexibility in mounting options includes shaft, base, face, and flange alternatives. The engine terminal box can be mounted in alternate positions rotated in 90\u00ba steps around the electric motor frame offering for unparalleled integration opportunities.
Ever-Power gear motors adhere to North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total alternative for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outside or in wet and dusty conditions without the usage of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Caracter\u00edsticas del producto
Potencia nominal de hasta 5,5 kW.
Par motor 25 \u2026 1.000 Nm
Velocidades de salida 0,2 \u2026 300 min-1
Posibilidades de instalaci\u00f3n vers\u00e1tiles
Totalmente cerrado, sellado contra el polvo y las salpicaduras de agua.
Lubrication change first after 15000 hrs
Engranajes de bajo ruido
Conexi\u00f3n a la red el\u00e9ctrica 110 \u2026 690 V, 50\/60 Hz
Carcasa con protecci\u00f3n IP65 (est\u00e1ndar) o IP66 (opcional).
Caracter\u00edsticas adicionales:
Conexi\u00f3n mediante conectores de enchufe.
With integrated inverter up to 7,5kW.
Marca de Poder Eterno
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Categor\u00eda de corrosi\u00f3n seg\u00fan DIN ISO 12944-5
C1, C2, C3, C4, C5-Nosotras, C5-M
MOTORES DE CORRIENTE CONGELADA CON ENGRANAJES DE HEBLINA
Ever-Power DC worm equipment motors are the option for applications requiring a good corner turn, optional dual output, or an inability for the electric motor to be back again driven. The DC correct angle equipment motors are created for constant and intermittent duty procedure. Our right angle equipment reducers are designed with many mounting plate options, making them ideal for a number of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
CARACTER\u00cdSTICAS
De 1\/43 a 3\/8 HP
12, 24, 90, 130, 180 VCC, 115 FWR
9 \u2013 475 RPM
1,5 \u2013 315,9 in-lb de par nominal
Tama\u00f1o de marco 60, 80, 108 mm
Relaciones est\u00e1ndar de 5:1 a 100:1
Standard brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a little package size. Worm Equipment Motors are excellent for applications that want a personal- locking or breaking characteristic since the output shaft can\u2019t rotate when there\u2019s no power used. On top of that, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision slice gears, voltages and sizes, EP Items includes a DC Worm Equipment Motor solution for your application.
Caracter\u00edsticas y beneficios
Very High Torque Capabilities
Caracter\u00edsticas de autobloqueo\/frenado
Transferencia de movimiento de 90 grados
Capability to Handle Large Equipment Reduction Ratios
Alta durabilidad
Bajo nivel de ruido
Configuraci\u00f3n flexible
Aplicaciones
Security Door Locks \/ Industrial Conveying Systems \/ Security Gates \/ Teeth Chair \/ Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Items will continue to work with you to create and produce a Worm Gear Electric motor that may optimize the efficiency of your unique application.
Dise\u00f1ado seg\u00fan sus necesidades espec\u00edficas
Engine Type: Brushed \/ Brushless \/ Coreless
Voltaje
Velocidad de salida
Fuerza
Actual
Esfuerzo de torsi\u00f3n
Relaci\u00f3n de reducci\u00f3n
Material y tama\u00f1o del eje
Material de engranajes
Shaft Configuration: (D Trim \/ Round \/ Splined \/ Other)
Par\u00e1metros generales de tama\u00f1o (L, A, H)
Tipo de codificador: \u00d3ptico \/ Efecto Hall
Requisitos de montaje adicionales (cables, conectores, etc.)
INTRODUCCI\u00d3N
The turbo metal gear worm electric motor runs on the metal gear box for durability and a higher torque output. Due to the special mechanical structure of the worm get the engine output shaft is self locking and will not be rotated.
This part runs on the two wire connection and supports direction control in addition to PWM speed control. Rated voltage is 12v and can obtain 40RPM, with a torque of 8kg\/cm.
ESPECIFICACI\u00d3N
Tensi\u00f3n de funcionamiento: 6 \u2013 15 V
Tensi\u00f3n nominal: 12 V
Velocidad sin carga: 40 RPM
Corriente en vac\u00edo: 35 mA
Par nominal: 32 RPM
Corriente nominal: 180 mA
Ranked Torque: 2.2 kg.cm
Potencia nominal: 1,1 W
Par de bloqueo: 8 kg\/cm
Corriente de bloqueo: 1 A
Relaci\u00f3n de reducci\u00f3n: 1:150
Peso: 167 g
Motorreductores EP con engranajes helicoidales: tecnolog\u00eda de accionamiento modular y personalizable.
Worm gear devices from EP DRIVESYSTEMS especially show their strength in applications where large gear ratios are necessary. Our worm geared motors will be therefore optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Escabroso
Our worm geared motors have a higher overload capacity
F\u00e1cil de mantener
Washdown versions allow simple and effective cleaning of the drive system.
Protecci\u00f3n contra la corrosi\u00f3n
La conversi\u00f3n de superficie sellada NSD tupH es excepcionalmente resistente a productos qu\u00edmicos, a la corrosi\u00f3n y a la abrasi\u00f3n.
Flexibilidad
Our modular design give users maximum freedom.
El sistema modular para una m\u00e1xima flexibilidad: Nuestras unidades de engranajes helicoidales EP
There are numerous applications that want drive systems, and each one of these has its unique requirements. The EP series worm gear motors can be quickly and effectively adapted to satisfy your needs.
Worm gear devices impress with their high power density and compact design. If required, we can also source them with the impressive nsd tupH surface area treatment.
In addition to the basic EP housing, we offer an extensive line of bolt-on components to customize the merchandise including torque arms, shaft addresses and output flanges. These could be easily field installed, but we may also be pleased to assemble the average person components for you.
\u00a1Descubre m\u00e1s sobre nuestros motores modulares de engranajes helicoidales SI!
Obt\u00e9n m\u00e1s informaci\u00f3n
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear systems feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for harsh and challenging industries like food processing and pharmaceuticals.
Versatile input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted casing designs.
motores de engranajes helicoidales
Motores de engranajes helicoidales para rangos de potencia peque\u00f1os.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides different repairing possibilities and enable an easy assembling for the client.
Various other drive configurationscan be designed by use of built-on accessories (e.g. torque arm and result flanges). The housings are made in light weight construction out of aluminium die cast. Electric motor attachment is realised in general by way of IEC adapter B5 or B14A.
Datos t\u00e9cnicos
N\u00famero de tallas: 5
Rango de potencia: 0,12 \u2013 2,2 kW
Rango de par de salida: 17 \u2013 230 Nm
Relaci\u00f3n: 5 \u2013 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Montaje\/instalaci\u00f3n: monobloque, brida, brazo de torsi\u00f3n
Buy Worm Get Gearbox with Motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm simply no load speed, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm extensive, 40mm high, a good robust worm drive gearbox powered by an MM28 engine (included), most ideal for applications where a simple to match, high torque output is required, nylon housing and gear, requires light oil or silicon grease lubrication, perfect for student based projects including robots and buggies.
Most suitable for applications where an easy to match, high torque productivity is required
Perfect for student based projects including robots and buggies
Reversible Substantial torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Caracter\u00edsticas:
The motor is Gear DC electric motor with micro-turbine worm, you can
![\"\"](\"http:\/\/gearboxes-worm.xyz\/wp-content\/uploads\/2020\/03\/worm-motor.jpg\" "\\"\\"")
transform the wiring-connection to change motor rotation.Turbo worm geared motor with self-lock, that’s, in the case of motor without electric, the end result axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear motor, trusted to be installed the dimensions requirements strictly occasion.
Presupuesto:
Modelo: JGY370
Voltaje: 12 V CC
Velocidad sin carga: 40 r\/min
Output torque: 5.6kg.cm
Corriente nominal: 0,06 A
Peso: 163 g
Aplicaci\u00f3n: abrir la pantalla, puerta, mini cabrestante, etc.
In sumo robot or combat robot competition where huge holding torque’s engine is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. How come worm gear so special? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the path of transmission (input shaft vs output shaft) isn’t reversible when working with large reduction ratios, because of the increased friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This can often be a advantage when it is desired to eliminate any likelihood of the result driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Caracter\u00edsticas y especificaciones:
Caja de engranajes met\u00e1lica
Output shaft is self-locking because of the worm gear’s characteristic
Tensi\u00f3n nominal: 12 V CC
Velocidad de salida nominal: 150 RPM
Par de salida nominal: 117 mN\u00b7m (1,2 kgf\u00b7cm)
Par de bloqueo: 196 mN\u00b7m (2 kgf\u00b7cm)
Corriente sin carga: 60 mA
Corriente de bloqueo: 1,8 A
Di\u00e1metro del eje de salida: 6 mm con ranura de 4,5 mm
Peso: 150 g<\/p>\n