Single and double reduction planetary equipment drives to be used with electric, hydraulic, air flow motors or mechanical power insight from high quickness, low torque sources to deliver decreased speeds at increased torques. The input aspect has standard SAE pads for Plastic Gear Rack engine mounting. Obtainable in the three output configurations proven below. Many units can be furnished with an intrinsic parking brake.
One reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input speed is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Devices provide 95% power tranny efficiency.
Wheel Drive
Input side has regular SAE pads and splined input. Output side has hub for installation automobile wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.
Shaft Output
Input side regular SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined input. Output side includes a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and temperature treated ring equipment to reduce backlash growth due to wear. The external bearing nut provides the best in shaft retention and shaft power. Output could be a spindle shaft or various sizes of integral pinion gears.
